Home    Training    Meet the Experts

Meet the Experts​

Training Blog: On the Job with Joe
  • Span of control (02/25/2016)
  • Surface temperature checks for heater plates (02/11/2016)
  • Altitude and psig (01/20/2016)
  • psi vs. psig in Pipeline Pressure Testing (01/13/2016)
  • Earthquake Protection for Pipelines (01/06/2016)
  • Purging and Nitrogen Slugs (12/30/2015)
  • Plastic, Polyethylene, or PE? (12/23/2015)
  • Pressure Regulation and Flow Control (12/16/2015)
  • Ball Valves vs. Lubricating Plug Valves (12/09/2015)
  • Cathodic Protection for Buried Steel Pipe (11/25/2015)
  • Plastic Pipe on Bridges (11/11/2015)
  • The Difference Between Plastic Pipe SDR and DR (10/28/2015)
  • Bending Plastic Pipe in the Field (10/14/2015)
  • Mechanical vs. Fused Fittings on Plastic Pipe (09/30/2015)
  • Valve Operability Inspection Checks on Distribution System Valves (09/30/2015)
  • Why Do Squeeze Tools Need to be Grounded? (09/16/2015)
  • Gas Range Connector Installation Requirements (09/02/2015)
  • Tolerance Zone (08/26/2015)
  • Natural Gas Odorant (08/21/2015)
  • Gas Appliances and Carbon Monoxide (08/21/2015)
  • Third-Party Damage (08/21/2015)
  • Yellow Warning Tape (08/04/2015)
  • Anode Installation Location (07/27/2015)
  • Cold Flow Stabilization (07/27/2015)
  • Welding on Transition Fittings: Polyethylene (PE) Protection (07/14/2015)
  • Polyethylene Heat Fusion Equipment (07/14/2015)
  • About Joe:  Joseph Corso is a ​seasoned utility professional, trainer, and subject matter expert. He joined GTI after over 37 years of service in the gas industry.

    coffee cup challenge logoAre you looking for answers to gas distribution question for Joe Corso? Send your questions to Joe. When we publish your question (and Joe's thoughtful answer), we'll send you a Cup of Joe--that is, a $5.00 Starbucks gift card. If you would like to be added to the GTI Distribution and Transmission weekly update, please send us an email at education@gastechnology.org.


    LNG expert Margaret Doyle
    Margaret Doyle, GTI LNG Expert

    Margaret Kaigh Doyle is a Senior Manager for Business Development at Gas Technology Institute (GTI). As a member of the GTI Corporate Development team, she helps drive GTI’s global business and training opportunities in liquefied natural gas (LNG). Ms. Doyle is a longstanding appointed member of the U.S. Coast Guard Chemical Transportation Advisory Committee (CTAC). She also chairs the recently formed CTAC subcommittee tasked with "Developing Recommendations for Safety Standards for the Design of Vessels Carrying Natural Gas as a Cargo or a Fuel". She also participates on the U.S. Delegation to the IMO on matters of LNG as a fuel.​

    ​Prior to joining GTI, Doyle was Vice President of Development at the US Maritime Resource Center, Ms. Doyle earned her B.S. from the U.S. Merchant Marine Academy, Kings Point, NY, and a Master of Engineering in Environmental Pollution Control from Pennsylvania State University. She also holds a Master of Engineering Management from George Washington University.

    Mariner Training: Alternative fuel competency.


    GTI Training in the News
  • Ensuring Quality Contractor Workforce Through Standardized Training
    Pipeline and Gas Journal, September 2015
  • New GTI Field Skills training Program for Utilities and Their Contractors
    THE SOURCE, Summer 2015
  •  
    Did you know?
  • China's "Golden Age" of Natural Gas Development(Infographic)
  • Road to a Career in Energy(Infographic)
  • Pipeline Safety(Infographic)
  • Are You Ready for What's Next(Infographic)
  • ​​​​​​​​